Hooking up a gas dryer line

When you get your new dryer, replace the corrugated tubing that runs from the wall fitting to the appliance. Make connections to steel gas pipe Older houses often have threaded steel gas pipe. Test for Leaks Turn the gas back on and swab each joint with a solution of 2 tsp. Keep the vent hose to the shortest length possible to increase drying time and the efficiency of the dryer.

You could cut a new length of coiled soft copper, flare the ends and connect it with flare fitting. There are two options. July 29, 6: But knowing which fittings to use where can be tricky, and using the wrong ones can lead to a dangerous leak.

You could have more gas near the floor, or downstairs, than up by your nose. It takes a couple hours away to reset your nose. Tighten the nut with an adjustable or open-end wrench.

Adjustable wrenches You may also need a flaring tool. The ninth step is to plug the gas dryer in and attach the loose end of the vent hose. Coat all threaded pipe connections with pipe thread compound before assembly.

If the supply pipe has a cap, remove it with a pipe wrench where it comes out of the wall. The photo shows how to use common plumbing parts to join a new ball valve and a flexible stainless steel connector to steel pipe.

How Do You Hook up a Gas Dryer?

The eighth step is to fasten the vent hose to the duct and place the hose clamp on and tighten it. Or you could replace the damaged tubing with a flexible stainless connector as shown here. Wash the floor where the gas dryer is to sit and let it dry.

The plumber who installed the gas line hooked up my dryer. Is this something I can do myself?Make gas line connections from steel or copper pipes to ranges and clothes dryers safe and secure by using the proper fittings and connections.

How to Connect Gas Pipe Lines. This article will show you how to safely connect a gas dryer or gas range. Kits containing a flexible stainless steel gas line and fittings are available at home.

Hooking up the vent for a clothes dryer is challenging in the best of situations since the outlet is tight up against the back of the appliance.

It becomes even more challenging when the space is very tight, such as when the dryer is located in a small closet. attach one end of the gas line to the dryer inlet fitting and hand tighten. The seventh step is to check for leaks once the dryer's gas line is hooked up.

Mix 50 percent water with 50 percent liquid dish soap and put the solution on the newly installed gas connections, then turn the gas on.

Jul 29,  · Twelve years ago, when I bought this house, I had a gas line run from the kitchen to my new stacked one-piece washer and gas dryer. The plumber who installed the gas line hooked up my dryer. I just moved to a new house and it has a gas hookup. I have never dealt with gas before so this is new.

I need help just hooking up the hose from the gas line to the dryer. Prices are going to vary depending on where you live.

How to Connect Gas Pipe Lines

I can tell you how much we charge to hook up a gas dryer in our area. Providing you already have a gas shut off valve (which is 3/8" or 1/2") connected to a piped gas line directly behind where your dryer sits,(shouldn't be more than 4 feet away) it would be plus parts to come to your .

Download
Hooking up a gas dryer line
Rated 5/5 based on 15 review